Pairing And Connecting The Bluetooth® Wireless Handset; Install A Comfort Wired Handset - Alcatel-Lucent 8068S User Manual

Alcatel-Lucent Cloud Edition
DeskPhone
1.10.3 Pairing and connecting the Bluetooth® wireless handset
This feature is only available with compatible Bluetooth® deskphone. Otherwise the corresponding menu is not
displayed or is inactive.
Before the Bluetooth® handset can be used, it must be correctly paired to the terminal. Pairing will create a
wireless link between the Bluetooth® wireless handset and the deskphone.
1- Set your deskphone to 'discover' the Bluetooth® wireless handset
•
Select the settings icon from the phone menu (see the navigation section of your phone model).
•
Press the keys associated with:
scanning starts.
2- Put the handset in detectable mode
•
With the handset turned on, press and hold the 2 Bluetooth® handset keys (B, C) at the same time. If
voice prompts are enabled, you hear: "Pairing mode, waiting for connection" ».
3- Connect the handset with the deskphone
•
Searching for Bluetooth® equipment. Wait for the detected equipment type and address to be
displayed.
•
Select the Bluetooth® wireless handset displayed in your deskphone: "ALE BT WB Handset".
•
Add the device by selecting the relevant menu on your deskphone (depending on the deskphone).
•
If voice prompts are enabled, you hear: "Device connected". The 3-note tone indicates that the handset
has been installed correctly. The LED flashes blue or red depending on the battery charge level.
The handset is correctly connected if it appears in the list of connected devices on your deskphone (see user
manual of the deskphone). Press the Line key of the handset to test the connection, your deskphone prompts you
to enter a number. Please contact your installer if you encounter any problems. Before contacting your installer
make sure you have information such as the serial number, the date code and the technical reference that you
can find on the battery.

Install a comfort wired handset

•
Remove the rubber.
•
Plug-in the wired handset to the appropriate connector (refer to
phone description).
•
Make sure you position the cable correctly in the compartment
intended for that purpose.
8AL90362ENRB ed01
Phone Bluetooth® Add device.
29 /86