Setting The Frame Rate - Ricoh CAPLIO Caplio R30 User Manual

Setting the Frame Rate

The number of shot frames per second (frame rate) in Movie Mode
can be selected from 30 and 15.
1.
Switch the Mode Selector to 3.
2.
Press the M/O button.
The shooting setting menu appears.
3.
Press the " button to select [FRAME RATE] and press the
$ button.
4.
Press the !" button to select [30
FPS] or [15 FPS].
5.
Press the M/O or # button.
6.
If the # button was pressed in
Step 5, press the M/O
button.
This completes the frame rate setting.
The shooting setting menu disappears and the LCD monitor displays the
set values.
The set values are used for shooting until they are changed the next time.
Note
The movie recording time depends on the capacity of the SD memory card.
The recording time is as shown below.
IN
320 × 240 1 min
(15FPS) 17 s
320 × 240 39 s
(30FPS)
160 × 120 4 min
(15FPS) 38 s
160 × 120 2 min
(30FPS) 26 s
32MB 64MB
1 min 2 min
27 s 59 s
44 s 1 min
31 s
5 min 10 min
16 s 47 s
2 min 5 min
46 s 40 s
128MB 256MB
6 min 12 min
3 s 4 s
3 min 6 min
4 s 7 s
21 min 43 min
49 s 29 s
11 min 22 min
27 s 50 s
512MB 1GB
24 min 46 min
19 s 47 s
12 min 23 min
19 s 42 s
87 min 168 min
37 s 30 s
46 min 88 min
1 s 31 s
95