Setting The Frame Rate - Ricoh CX2 User Manual

Note ----------------------------------------------------------------------------------------------
• The flash cannot be used.
• While shooting movies, only digital zoom can be used (up to 4.0×). (GP.40)
• When the shutter release button is pressed in Step 2, the camera focuses on the
subject.
• The remaining recording time may not change uniformly because it is recalculated
from the remaining memory capacity during movie recording.
• Use the shooting menu to set the image size and frame rate of movies.
• The shooting menu items for movie mode differ from those in still image mode.
(GP.98)
• Depending on the remaining battery level, the battery may become depleted during
movie shooting. Use of a battery with adequate remaining power is recommended.
• Use of a high speed SD memory card with sufficient memory is recommended when
shooting for long periods.

Setting the Frame Rate

You can select the number of shot frames per second (frame rate)
in movie mode.
1
Turn the mode dial to 3.
2
Press the MENU button.
• The shooting menu is displayed.
3
Press the ADJ./OK button " to
select [Frame Rate] and press
the button $.
4
Press the button !" to select
[30 Frames/Sec] or [15 Frames/
Sec].
5
Press the ADJ./OK button.
• The setting appears on the screen.
Movie Frames---------------------------------------------------------------------------------
Movies consist of many frames whose images appear to be moving when displayed at
high speed.
3
95