Changing The Display; Maximizing The Lcd Monitor Brightness - Ricoh CAPLIO Caplio R30 User Manual

Changing the Display

If you press DISP., you can change the screen display mode, such
as switching between display/no display of symbols, etc.
Every time you press the DISP. button, the view cycles in the order
of Histogram On, Grid Guide, No Display, LCD Monitor Off, and
Normal Symbol Display.
Normal Symbol Display
LCD Monitor Off
(Synchro-Monitor Mode)

Maximizing the LCD Monitor Brightness

Hold the DISP. button down to maximize the display brightness.
When the brightness is maximal, holding the DISP. button down returns the
brightness to the level set in [LCD BRIGHTNESS] (P.114).
Term
Grid Guide
Displays auxiliary lines on the LCD monitor to help shooting. These lines are not recorded
with images.
Synchro-Monitor Mode
Keeps the LCD monitor off except when the camera is operated. This mode is effective for
saving power consumption. With this mode, half-pressing the shutter release button turns the
LCD monitor on. Subsequently, full-pressing the shutter release button displays the shot
image on the LCD monitor, and then turns the LCD monitor off.
Histogram On
Switches screens with the
DISP. button
Grid Guide
No Display
25