Setting The Frame Rate - Ricoh Caplio R40 User Manual

Setting the Frame Rate

You can select 30 fps or 15 fps for the number of shot frames per
second (frame rate) in Movie Mode.
1.
Switch the Mode Selector to 3.
2.
Press the C/D button.
The Shooting Setting menu is displayed.
3.
Press the " button to select [FRAME RATE] and press the
$ button.
4.
Press the !" button to select
[30FPS] or [15FPS].
5.
Press the C/D or # button.
6.
If you pressed the # button in
Step 5, press also the C/D
button.
The Frame Rate setting is completed.
The Shooting Setting menu closes and the
setting appears on the screen.
The setting is used for shooting until it is changed.
Note
The movie recording time depends on the capacity of the SD memory card.
The table below shows the available recording time.
Internal
Memory
320×240 1 min
(15FPS) 17 s
320×240 39 s
(30FPS)
160×120 4 min
(15FPS) 38 s
160×120 2 min
(30FPS) 26 s
32 MB 64 MB
1 min 2 min
27 s 59 s
44 s 1 min
31 s
5 min 10 min
16 s 47 s
2 min 5 min
46 s 40 s
128 MB 256 MB 512 MB
6 min 12 min 24 min
3 s 4 s 19 s
3 min 6 min 12 min
4 s 7 s 19 s
21 min 43 min 87 min
49 s 29 s 37 s
11 min 22 min 46 min
27 s 50 s 1 s
1 GB
46 min
47 s
23 min
42 s
168 min
30 s
88 min
31 s
93