Tusing The Self-Timer - Ricoh CAPLIO Caplio R30 User Manual

tUsing the Self-Timer

You can set the Self-timer to shoot after either two or ten seconds.
A setting of two seconds is useful for preventing camera shake.
1.
Switch the Mode Selector to 5.
2.
Press the t (Self-timer) button.
The LCD monitor displays the Self-timer
symbol.
The "10" to the right of the symbol
indicates the number of seconds. In this
case, if you press the shutter button, the
camera will shoot after 10 seconds.
3.
Press the shutter release button.
The focus is locked, and the flash blinks when the self-timer starts.
Once the picture is taken, the self-timer mode is cleared.
Note
• Each press of the t (Self-timer) button, it selects a function in the following sequence: 10
sec, 2 sec, Self-timer Off, 10 sec, 2 sec.
• Self-timer settings are released when the power is turned off.
• When the self-timer is set to 2 seconds, the flash does not blink.
88