Mechanical Safety - L-Acoustics CLAMP250 Owner's Manual

Mechanical safety

Flown congurations
The CLAMP250 rigging system complies with 2006/42/EC: Machinery Directive. It has been designed following the
guidelines of BGV-C1.
2006/42/EC: Machinery Directive species a safety factor of 4 against the rupture. The own deployments described in
this manual achieve a safety factor of 7 or more.
CLAMP250 has a WLL (Working Load Limit) of 250 kg / 550 lb.
Products compatible with CLAMP250
Maximum limit with CLAMP250
Do not exceed the 250 kg / 550 lb WLL (Working Load Limit) of CLAMP250.
Check the total weight of the array in Soundvision.
Enclosure
X8 / X12 / X15 HiQ
Syva
A10 Wide/Focus
A10i Wide/Focus
A15 Wide/Focus
A15i Wide/Focus
Kiva II
Kara II
Kara IIi
SB15m
SB18
SB18 IIi
KS21
KS21i
CLAMP250 owner's manual (EN) version 1.0
Rigging element(s)
X-BAR
Syva Bar
A10-BUMP / A10-RIGBAR / A10-LIFT / X-BAR
A10i-BUMP / A10i-RIGBAR / A10i-LIFT
A15-BUMP / A15-RIGBAR / A15-LIFT / X-BAR
A15i-BUMP / A15i-RIGBAR / A15i-LIFT
KIBU II / KIBU-SB
KARA-MINIBU
KARAIIi-RIGBAR
KIBU-SB
KARA-MINIBU + KARA-MINIBUEX
KARAIIi-RIGBAR
A15-BUMP / A15-RIGBAR
A15i-BUMP / A15i-RIGBAR
Mechanical safety
9