Table of Contents
Advertisement
Rigging system description
Rigging system description
CLAMP250 is a quick trigger clamp designed to hang an L-Acoustics enclosure array from a truss.
It can lift up to 250 kg (550 lb).
CLAMP250 must only be used for vertical loads.
CLAMP250 is secured to the rigging accessory with a Ø 12 mm (0.5 in) rigging axis. The rigging axis is tted with an
M12 nut and a safety pin. Refer to
Mechanical safety
for compatible accessories.
Tighten the nut by hand.
Insert the safety pin in the rigging axis and lock it.
CLAMP250 owner's manual (EN) version 1.0
7
Advertisement
Table of Contents
