Advertisement
Table of Contents
Sintra Side Table
Assembly Instructions
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
A
B
plastic
dowel
glide x3
x5
Hardware Supplied
Phillips screwdrivers and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
C
D
E
locking
sticker
bolt
nut x5
x 5
x5
1
Advertisement
Table of Contents
Related Manuals for Mocka Sintra Side Table
Summary of Contents for Mocka Sintra Side Table
- Page 1 Hardware Supplied Phillips screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Sintra Side Table Assembly Instructions Panel layout Insert 3x bolts (C) into panel [1]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Insert 2x bolts (C) into panel [2]. Tighten with a screwdriver. Attach panel [3] to panel [2] with 2x dowels (A) and secure with 2x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Attach 5x stickers (E) to panels [2] and [3]. You’re done, enjoy! with 3x locking nuts (D). Tighten with a screwdriver. Attach 3x plastic glides (B) to the panels [2] and [3] using a hammer as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Sintra Side Table and is the answer not in the manual?
Questions and answers