Mocka Sintra Assembly Instructions

Coffee table

Hide thumbs Also See for Sintra:

Sintra Coffee Table

Assembly Instructions

Thank you for your purchase. Please follow the instructions for correct assembly.

While we took great effort to ensure these assembly instructions were correct at

the time of printing, sometimes updates are required post production. For the

most up to date versions please refer to the product page on our website.

mocka.com.au/mocka.co.nz

plastic

dowel

glide x6

Hardware Supplied

Phillips screwdrivers and hammer required

For quicker assembly, we recommend the

use of a power drill on a low-speed setting.

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558

locking

sticker

bolt

nut x12

x12

x 12

Table of Contents

Do you have a question about the Sintra and is the answer not in the manual?

Page 1 12 glide x6 Hardware Supplied Phillips screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 2 Sintra Coffee Table Assembly Instructions Panel layout Insert 8x bolts (C) into panel [1]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 3 Attach panel [3] to panel [2] with 2x dowels (A) and secure with 2x locking nuts (D). Tighten with a screwdriver. Attach panel [5] to panel [4] with 2x dowels (A) and secure with 2x locking nuts (D). Tighten with a screwdriver mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 4 Attach 12x stickers (E) to panels [2], [3], [4] and [5]. You’re done, enjoy! and screw with 8x locking nuts (D). Tighten with a screwdriver. Attach 6x plastic glides (B) to the panels [2], [3], [4] and [5] using a hammer as shwon. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...