Download
Share
Print this page
Mocka Sintra Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Mocka Manuals
  4. Indoor Furnishing
  5. Sintra
  6. Assembly instructions manual

Mocka Sintra Assembly Instructions Manual

Buffet
Hide thumbs Also See for Sintra:

Advertisement

Quick Links

Download this manual
Sintra
Buffet
Thank you for your purchase. Please follow the instructions for correct
assembly. While we took great effort to ensure these assembly instructions
were correct at the time of printing, sometimes updates are required post
production.  For the most up to date versions please refer to the product
page on our website. mocka.com.au/mocka.co.nz
mocka.co.nz I mocka.com.au

Advertisement

loading
Need help?

Need help?

Do you have a question about the Sintra and is the answer not in the manual?

Questions and answers

Related Manuals for Mocka Sintra

Summary of Contents for Mocka Sintra

  • Page 1 For the most up to date versions please refer to the product page on our website. mocka.com.au/mocka.co.nz mocka.co.nz I mocka.com.au...

  • Page 2: Panel Layout

    Sintra Buffet Panel Layout 40 x4 41 x2 Partlist Top Panel Back Panel Bottom Panel Shelf Panel Left Side Panel Door Right Side Panel Door Divider Divider Support Leg mocka.co.nz I mocka.com.au...

  • Page 3: Hardware Supplied

    The fixing device provided should fit most wall types, but please note that different wall materials may require different fixing devices from those supplied. Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz I mocka.com.au...
  • Page 4 Sintra Buffet Hardware Needed The round head is aligned with the direction of the arrow. Hardware Needed mocka.co.nz I mocka.com.au...
  • Page 5 Sintra Buffet Hardware Needed mocka.co.nz I mocka.com.au...
  • Page 6 Sintra Buffet front Hardware Needed Countersink back hole flat hole Turn Over Hardware Needed mocka.co.nz I mocka.com.au...
  • Page 7 Sintra Buffet Hardware Needed Door x2 Hardware Needed mocka.co.nz I mocka.com.au...
  • Page 8 Sintra Buffet NOTE: If the doors are uneven or Hardware Needed there is a gap in the middle, loosen or tighten the screw on the door hinge until they are sitting flush. Hardware Needed mocka.co.nz I mocka.com.au...
  • Page 9 Twist the adjuster on centre leg to make sure the top panel is flush. Once assembled lift furniture into place, do not drag. You’re done, enjoy! mocka.co.nz I mocka.com.au...
  • Page 10 MOVE DOOR OUTWARD by turning this screw clockwise by turning this screw counter-clockwise STEP 4 Adjust the Gap beteen door panel and side panel MOVE DOOR BACK OR Loosen this screw a bit. Re-tighten this screw. FORTH mocka.co.nz I mocka.com.au...