Motif Luna® Quick Guide
1. Buttons & Features
LCD Screen
A Massage Mode
B Expression Mode
C Cycles
D Vacuum Level
E Timer
Button Control
F Mode Button
G Cycles Increase/Decrease Button
H LED Night Light
I
Levels Increase/Decrease Button
J Power Button
2. Preparing The Luna Pump
Assembling The Luna Pump
1. Wash hands before touching
breast pump components.
2. Insert the diaphragm into the diaphragm
bottom (the component that connects
to the breast shield). Ensure that it fits
securely and that the diaphragm edge fits
around the rim of the diaphragm bottom.
3. Connect the diaphragm top (the
component that connects to the tubing)
over the diaphragm bottom, and
diaphragm, by snapping on the diaphragm
bottom into the rim of the top diaphragm.
4. Push the valve onto the underside
of the breast shield.
5. Connect the diaphragm assembly to the
top of the breast shield. Use a twisting
motion to attach, and later remove,
this assembly to avoid damaging it.
A
F
G
B
6. Screw the bottle onto the
underside of the breast shield.
7. Connect the tubing to the diaphragm
assembly, and connect the other
end of the tubing to the Luna. (For
single-pumping attach the cap
on one of the air flow ports).
8. Attach the power adapter to the Luna.
9. Plug the power adapter into
the electrical outlet.
C
D
E
J
H
I
Need help?
Do you have a question about the Luna and is the answer not in the manual?
Questions and answers