Related Manuals for Furniture of America CM-BK923
Summary of Contents for Furniture of America CM-BK923
- Page 5 2. Insert 2 round nuts (#A) into the large holes at each end of the side rails, then insert 2 bolts (#A) into the lower left/right end G/rails (#1,2). Secure using the Allen wrench (#K). 1. Align the lower front side rail (#5) and lower rear side rail (#6).
- Page 6 3. Insert 2 wood dowels (#J) into each end of the rear guardrails (#9) and into one end of the front guardrails (#10). Then 1. Align the upper front side rail (#7) insert those and upper rear side rail (#8). ends into the 2.
- Page 7 1. Insert the ladder rungs (#15) into the slots along the left/ right ladder rails (#13,14). 2. Insert a screw (#G) into the holes along the ladder rungs (#15) and secure using the Allen wrench (#K). 1. Align the ends of the left/right ladder rails (#13,14) to the rails.
- Page 8 Carefully place the twin slat kit (#16) onto the top bed and the full slat kit (#17) to the bottom bed. Insert a screw (#H) into each end and secure using a Phillips screwdriver. Make sure the beds do not feel wobbly or loose and all parts are firmly secured.
Need help?
Do you have a question about the CM-BK923 and is the answer not in the manual?
Questions and answers