Table of Contents
Advertisement
A
L
R
LINE OUT
B
COAXIAL
OUT
C
OPTICAL OUT
D
]
Connections
Connecting Cords
There are following three types of
connecting jacks at the rear of the deck.
L
Each type of jack requires a different type
of connecting cord.
R
For LINE IN/OUT (analog input/
LINE IN
output) jacks Å
Use the supplied or an optional audio
signal connecting cord such as RK-
C710HS, RK-C715HS, RK-C910ES, RK-
C915ES etc.
Note
COAXIAL IN
Red plugs and jacks are for the right
channel (R) and white ones for the left
channel (L).
For COAXIAL IN (digital input) jacks
ı
Use an optional coaxial connecting cord
such as VMC-1ES, VMC-10ES etc.
For OPTICAL IN/OUT (optical
transmission digital input/output)
jacks Ç
Use an optional optical cable such as
OPTICAL IN
POC-15, POC-10HS etc.
How to connect the optical cable Î
Remove the cap and plug it in firmly.
Notes on the optical cable
• Do not bend the cord. When the cord is
not used, curl it
with a diameter of more than 15 cm (5
inches).
• Do not use it under high temperatures.
• When the optical cable is not connected,
cover the OPTICAL IN/OUT jacks with
the supplied caps.
7
/
8
15
Advertisement
Table of Contents
