Writing During Playback (Rehearsal Function) - Sony DAT DTC-690 Operating Instructions Manual

)
7 £ 8
1
WRITE
END ID
2
1
3
WRITE
REHEARSAL
END ID
1, 3
$ › 1 ¡ • ¶
2
¡
START ID
SKIP ID
S
END ID
WRITE
a)
End ID
Writing during Playback
(Rehearsal Function)
• During playback, no end ID can be
written on a blank section.
• To write the end ID just before a blank
section with the end search function,
perform "Writing during Recording"
described above.
• Make sure that the safety tab of the
cassette is closed.
1
During playback, press END ID
WRITE at the desired position.
The REHEARSAL indicator lights and
the WRITE indicator flashes, and the
portion for 3 seconds to the point
where you pressed the END ID
WRITE button, is played back
repeatedly (rehearsal function).
The end of the repeated portion will
be the beginning of the end ID.
2
Press the 1 1 1 1 1 or ¡ ¡ button to ¡ ¡ ¡
adjust the "repeat end" point.
The "repeat end point is shifted
backward with the 1 button or
forward with the ¡ button by 0.3 of
a second.
The indicator at the MARGIN display
shows how much the "repeat end"
point is shifted from the point where
you pressed the END ID WRITE
button.
a) When you pressed ¡ twice
3
After setting the beginning of the
end ID at the desired point, press
the END ID WRITE button again.
The "EE" and WRITE indicators light,
and an end ID is written.
41