Connection Examples - Sony DAT DTC-690 Operating Instructions Manual

: Analog signal
: Digital signal (coaxial cable or optical cable)
: Signal flow
LINE OUT
CD
LINE OUT
TAPE, etc.
c)
TAPE
REC OUT
LINE IN LINE OUT DIGITAL IN/OUT
COAXIAL OPTICAL
IN IN
L L
R R
16
a)
DIGITAL OUT
b)
DIGITAL OUT
DIGITAL IN
B) B)
A)
DTC-690
OUT
d)
Connections

Connection Examples

If your amplifier is not equipped
with digital signal jacks
a) CD player
b) DAT deck
c) Amplifier
d) to a wall outlet
A)When recording via digital-to-digital
connection, connect a DAT deck (the
digital input) to DIGITAL OUT OPTICAL
of the DTC-690.
B)When recording via digital-to-digital
connection, connect the sound source
equipment (the digital output) to
DIGITAL IN (COAXIAL or OPTICAL) of
the DTC-690.
When connecting a microphone
Connecting a stereo microphone amplifier
(the analog output) to LINE IN of the DTC-
690.
Note
If "PROH" appears on the display,
recording via digital-to-digital connection
cannot be performed.
In this case, connect the sound source
equipment using LINE IN and OUT jacks.