Table of Contents
Advertisement
Quick Links
Set using ISO screws
SPECIFICATIONS
Power Requirements:
AC
%/60 Hz, 100V, 110V, 117V,
REC/PB connector
125V, 220V and 240V,
20W
Impedance:
10k2
Track System:
Four-track stereo and mono
Maximum
sensitivity: -33d B (17mV)
Reel Size:
7" (18cm)
maximum
Outputs:
Two
LINE
OUTputs
?
Tape Speed:
71/ ips, 334 ips and 17% ips
Impedance: 100kQ or more
(19 cm/s, 9.5 cm/s and 4.8 cm/s)
Output level: OdB (0.775V)
; Recording Time:
Fane apeed
4track
4track
with 100k?
load
(with 1,800 ft tape)
stereo
mono
REC/PB
connector
714 ips(19cm/s)
1.5hrs
3hrs
Impedance: 100k
load
3% ips(9.5em/s)
Shrs
6 hrs
Output level: -2~-6 dB (1,.62~0,385V)
1%
ips (4.8cm/s)
6 hrs
12 hrs
HEAD
PHONE
output
Frequency Response:
20~25,000 Hz at 744 ips (19cm/s)
Impedance: 82 load
30~17,000 Hz at 3% ips (9.5cm/s)
Output level: -28 dB (30m)
30~9,000 Hz at 1% ips (4.8 cm/s)
Semiconductors:
27 transistors and 4 diodes
<
Signal-to-Noise
Ratio:
52 dB or better (at peak level recording)
Dimensions:
1676 (W) x 8546 (H) x 14346" (D)
Flutter and Wow:
0.09% at 7!/, ips (19 cm/s)
(416 x 210 x 376 mm)
0.12% at 334 ips (9.5 cm/s)
Weight:
22 Ib 8 oz (10 kg)
0.17% at 1% ips (4.8 cm/s)
Recording Bias Frequency:
Approx.
160 kHz
Inputs:
Two MIC inputs
Impedance:
6002
Maximum
sensitivity: - 72 dB (0.19 mV)
Two AUX
inputs
AS
{
Advertisement
Table of Contents
Need help?
Do you have a question about the TC-366 and is the answer not in the manual?
Questions and answers
Nothing happens when I select play?
If nothing happens when you select play on the Sony TC-366, the issue could be due to slack or worn-out belts. The belts may not be providing enough tension, causing components like the flywheel or tape counter to not turn properly. Additionally, parts of the mechanism may be seized or very stiff, preventing operation.
This answer is automatically generated