HOGERT HT1E601 User Manual page 15

4.2. 3. Automatic resistance measurement
Range Resolution
1000 Ω
10 kΩ
100 kΩ
1000 kΩ 100 Ω
10 MΩ
100 MΩ 10 kΩ
(SMART) resistance
Range Resolution
6 kΩ
Overload protection: 250 V.
Idle voltage: 1.5 V.
4.2. 4. Diode test
Function Range
Diode test
0.15V-2.5V
Overload protection: 250 V
4.2. 5 On/Off buzzer
Function range
100 Ω
Overload protection: 250 V.
4.2. 6. Capacitance
Range Resolution
100 nF 0.01 nF
1000 nF 0.1 nF
10 µF
100 µF 10 nF
1000 µF 100 nF
10 mF
Overload protection: 250V
4.2. 7. Direct current
Range Resolution
600mA 0.1mA
10.00A 10mA
Overload protection: mA range fuse (FF630mA / 250V); 10A fuse (FF10A / 250V).
When the measured current is greater than 5A, the continuous measurement time must not exceed 15 seconds and it is neces-
sary to stop the current measurement for 1 minute after the measurement
Adres producenta/ Adresse des Herstellers/ Manufacturer's Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
Accuracy
0.1 Ω
1 Ω
10 Ω ±(0.8% reading + 3 digits)
1 kΩ
± (1.5% reading +10 digits)
Accuracy
0.1 Ω ± (1.2% reading + 5 digits)
Resolution
0.001V
Resolution
The resistance is not greater than
1 Ω 30Ⅲand the built-in buzzer
produces a continuous sound.
Accuracy
1 nF
± (3.5% reading + 15 digits)
1 uF
Accuracy
±(0.8% reading + 3 digits)
±(1.2% reading + 3 digits)
Test conditions
Direct current: about 1 mA; voltage in
open circuit: about 2.5 V.
The display shows the approximate
value of the diode voltage drop.
Introduction Test conditions
The voltage in an open
circuit is about 1 V.
15