Spectrum Digital XDS510USB Installation Manual page 5

5. Check on "CD-ROM drives" and click on next. The system will prompt you to insert the
manufacturer's installation disk, as shown in the Figure A-5.
6. Click on Browse and locate the file usb510.Inf in the installation CD(TI DSP
Emulator\XDS510 USB_driver), or in the folder where you have downloaded the file into, as
shown in Figure A-6.
7. Click on next, the following window will be displayed ,as shown in Figure A-7.
Figure A-4
Figure A-5
Figure A-6
5