CPI 1.2M Ku-BAND Series Assembly Manual page 9

4096-1000
CPI Satcom & Antenna Technologies 1.2M Ku-BAND SERIES 1122
STEP 2.
The Az/El Positioner Assembly is supplied with a
Mast Sleeve for use on 2.88" OD mast pipes.
If the install is on a 2.88" OD mast pipe, the Mast
Sleeve should be inserted into the Canister
before proceeding to reduce the Canister's
inside diameter appropriately.
If the install is on a 3.00" OD (76mm OD) mast
pipe, the Mast Sleeve can be omitted and
discarded.
STEP 3.
Slide the Az/El Positioner Assembly over the top
of the Mast Pipe until fully seated.
Snug but do not tighten the three Canister
Lockdown Bolts.
Canister
Lockdown Bolts
(3 Places)
Mast Pipe
8