CPI 1.2M Ku-BAND Series Assembly Manual page 10

4096-1000
CPI Satcom & Antenna Technologies 1.2M Ku-BAND SERIES 1122
STEP 4.
Align the four holes in the Reflector with the four holes in the Az/El Positioner and attach
using a Hi-Lo screw in each of the four holes. Tighten the four screws to 15 ft/lbs for the
1.2M antenna
Note: The "bottom" and "sides" of the Reflector can be identified by the
presence of a Feed Rod mounting hole not present in the "top" of the Reflector.
Top of Reflector
(No Hole)
Reflector
Bottom of Reflector
(Feed Rod Hole)
Hi-Lo Screws
(4 Places)
9