CPI 1.2M Ku-BAND Series Assembly Manual page 13

CPI Satcom & Antenna Technologies
"B" Scale
STEP 2: Coarse Azimuth Adjustment:
satellite, rotate the entire Antenna in azimuth (about the mast pipe) until the
target satellite is identified. Once the target satellite is located, securely
tighten the Canister hardware (3 places). See Figure 3-2.
Read Scale At
Indicator Mark
Figure 3-1
With the electronics set to acquire the
Figure 3-2
12
1.2M Ku-BAND SERIES 1122
Elevation
Adjust Bolt
Loosen Before
Adjustment
(Each Side)
Loosen Before
Adjustment
(Each Side)
Canister Hardware
Coarse Adjust About
Mast Pipe
4096-1000
(3 Places)