NEC SL2100 Hardware Manual page 35

ISSUE 4.0
Number of Chassis
Built-In VoIP Channel
VoIP Channel (by VOIPDB)
Conference Circuits *1
DSP Resource *1
DSP Sender
*2
*1. Service Tone receiver, DTMF receiver, Caller ID sender / receiver, MF receiver, MFC receiver
*2. Service Tone sender, DTMF sender, MF sender, MFC sender
3.2 Chassis Capacity
System image of Chassis capacity (ISDN, Trunk, Extension) is shown as below.
CPU Board
Main Chassis (IP7NA-4KSU-C1)
EXIFE Board
SYSTEM CAPACITY
1 Chassis 2 Chassis 3 Chassis
8
16
128
32 (Max. 16 parties per Conference)
1 Chassis: 72
2 Chassis: 104
3 Chassis: 136
128
Expansion Interface Board
082U
008U
000U
*1) Following Daughter Board can be mounted on
the 082U/008U/000U.
3COIDB Analog Trunk x 3
1PRIDB ISDN PRI x 24
Expansion
Interface Board x 4
EXIFB Board
Expansion
Interface Board x 4
EXIFE Board
Expansion Chassis (IP7NA-4KSU-C1) x 2
Figure 1-2 System Image
Initially bundled
License controled 16ch. Software version
V.4.00 or higher required.
Number of available channels is decided by
license
1 Chassis: CPU (24) + EXIFB (48)
2 Chassis: CPU (24) + EXIFB (48) + EXIFE
(32)
3 Chassis: CPU (24) + EXIFB (48) + EXIFE
(32) + EXIFE (32)
*1
: Digital Extension x 8, Analog Extension x 2
*1 : Analog Extension x 8
*1 : Extension x 0
SL2100
Description
33