NEC SL2100 Hardware Manual page 106

ISSUE 4.0
5.2.2 System Connection
The IP Multiline Telephone is connected via PoE SWITCH.
5.2.3 Connectiong the IP Multiline Telephone
1. Connect the LAN Network 10Base-T/100Base-TX cable to the LAN(=) connector.
2. Power Feeding is used by PoE, and AC/DC Adapter is not used.
3. The IP Multiline Telephone has a Switching HUB to connect a PC to the LAN Network. Connect
the 10Base-T/100Base-TX straight cable used for connection to the PC to the PC(X) connector
and to the PC.
HAC
5.2.4 Applying Power to the IP Multiline Telephone
IP Multiline Telephone (IP7[ ]-8IPLD-C1) supports PoE power source for the Telephone.
INSTALLING THE MULTILINE TELEPHONES AND OPTIONAL TERMINALS
Figure 2-92 IP Multiline Telephone Connection
H EAD SE T
LAN(=) PC(X)
H AN D SE T
< Bottom view>
Figure 2-93 IP Multiline Telephone Connectors
H E A D S E T
LAN(=) PC(X)
H A N D S E T
HAC
SL2100
104