Osd Menu; Using The Osd Menu - Xerox XM7-19w User Manual

OSD Menu

Using the OSD Menu

20
3 OSD Menu
To create the best picture, your XM7-19w has been preset at
the factory with the Preset Mode Timing shown on page 27.
The OSD (On Screen Display) Menu allows the user to adjust
various settings and options by following the steps below.
1
Press the MENU button to display the OSD. The OSD main
menu provides an overview of the selection of controls
available.
picture
advanced
audio
options
utilities
reset
exit
2
Press the DOWN or UP button to highlight the desired icon.
Then, press the MENU button to activate the highlighted
icon.
3
Press the DOWN or UP button to select the desired
adjustment icon. Then, press the MENU button.
4
Press the DOWN or UP button to change the value of the
selected item.
5
Select the exit icon to exit the OSD.
6
Repeat steps 1 through 4 to make further adjustments. All
changes are stored immediately.
auto adjust
brightness
contrast
h position
v position
phase
clock
exit
Xerox© LCD Monitor User's Manual
<up>to select