CE Marking Declaration Of Conformity ...4 Federal Communications Commission (FCC) Statement ...5 Important Safety Instructions ...6 1 Introduction Features ...9 Package Contents ...10 Front View and Controls ... 11 2 Installation Connecting Your LCD Monitor to a Computer ...12 Method : Analog (D-SUB) Connection ...12 Installing Your LCD Monitor ...14 3 OSD Menu Using the OSD Menu ...15...
Page 4
EUROPE When disposing of Proview products in Europe, please contact one of the following three locations to make arrangements for recycling. Proview International (UK) Limited 30 The Avenue, Watford, Hertfordshire WD17 4AE United Kingdom Tel: +44 1923-248-111 Fax: +44 1923-248-222 Timothy Lo Courriel: tim.lo@proview.co.uk...
FCC/CE CE Marking Declaration Of Conformity This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/EEC “Low Voltage Directive” as amended by Directive 93/68/EEC. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Important Safety Instructions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. Warnings •...
Page 8
• Do not touch the power cord and antenna cable during lightning. • Remove the plug from the wall outlet if the equipment will not be used for a long period of time. • Do not place, use or handle this equipment near water. •...
Page 9
• If any of the following conditions occur, unplug the power cord from the outlet and request service from qualified personnel. a. The power cord or plug is damaged. b. Liquid is spilled into the product . c. An object falls onto or into the product. d.
1 Introduction Features • Rapid Video Response Fast action media such as gaming, DVD and video conferencing will playback smoothly thanks to the rapid video response time of the LCD panel. • High Contrast Ratio Colors will appear vibrant and lifelike producing superior image quality.
Package Contents Make sure all of the following contents are included in the box. If any items are missing, please return this product to the original place of purchase. CAUTION: Be sure to save original box and all packing material for future transport of monitor.
Front View and Controls ▼▲ In OSD mode, press the ▲/▼ buttons to select the desired menu. MENU Press once to display the OSD (On Screen Display). And press again to activate the desired setting. The LED light indicates when the LCD monitor is activated (green light indicates power on and amber light indicates power saving).
2 Installation Refer to the owner’s manual of the computer for connections. In the process of connecting external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Connecting Your LCD Monitor to a Computer Method : Analog (D-SUB) Connection Turn off the computer and unplug the power cable.
Page 14
Press the unit to turn the monitor on, then turn the computer on. If the monitor displays an image, the monitor is successfully installed. If no image is displayed, check all connections. NOTE: Unplug the monitor before installation to avoid electric shock or damage.
Installing Your LCD Monitor Follow the instructions below to set up and install the monitor. The package contains: Display unit Stand Cover an even stable surface with a soft cloth. Place the unit face-down on the cloth. Fit the stand onto the bottom of the display unit as shown, then push until the two latches snap into their sockets.
3 OSD Menu Using the OSD Menu To create the best picture, your XA3 series has been preset at the factory with the Preset Mode Timing shown on page 21. The OSD (On Screen Display) Menu allows the user to adjust various settings and options by following the steps below.
The OSD Options The main menu includes the following options: Adjusts picture settings such as brightness, contrast. Allows selection of the general color tint: CUSTOM COLOR, WARM, or COOL. Adjusts picture settings such as H/V position, H size and phase. Adjusts the setting of the display time of the on-screen menu.
The picture Menu The picture menu provides access to the following menus: The picture menu includes the following options: auto adjust Automatically adjust the display settings to optimize performance based on the D-SUB signal. brightness Controls the overall brightness. contrast Controls the difference between the brightest and darkest regions of the picture.
The advanced Menu The advanced menu provides access to the following menus: The advanced menu includes the following options: Increase this setting to see crisp edges in the picture; decrease for soft edges. Allows selection of the general color tint: user, natural, warm, or cool.
The options Menu The options menu provides access to the following menus: The options menu includes the following options: osd h. position Moves the OSD left and right in the window. osd v. position Moves the OSD up and down in the window. exit Exits the OSD menu.
The utilities Menu The utilities menu provides access to the following menus: The utilities menu includes the following options: Allows selection of the display time of the on-screen menu. Controls the translucence of the on-screen menu’s background. Allows selection of the languages used on all the on-screen menus.
4 Technical Information Preset Mode Timing Chart The screen image has been optimized during manufacture for the display modes listed below. Video signal: (IBM PC/AT) Dot X Line 720 x 400 640 x 480 800 x 600 1024 x 768 1280 x 1024* * 1280 x 1024 resolution is not available in 15”...
Plug and Play This monitor conforms to the VESA DDC (Display Data Channel) standard, which means that when it is used with a DDC compatible video card, the monitor is easier to set up. With VESA DDC 1/2B, when the monitor is turned on, it will automatically notify a windows 9X/2000/XP host computer of its scanning frequencies, capabilities and characteristics.
Troubleshooting Before consulting service personnel, check the following chart for a possible cause and solution to the trouble you are experiencing. Monitor will not turn on No picture Poor picture or abnormal picture Out of range message appears • Make sure the power cord is plugged in. •...
Need help?
Do you have a question about the XA3 Series and is the answer not in the manual?
Questions and answers