On-Screen Display (Osd) Menu; Using The Osd Menu - Xerox XM3-22w User Manual

Using the OSD Menu

Xerox© LCD Monitor User's Manual

3 On-Screen Display (OSD) Menu

To create the best picture, your XM3 series has been preset at
the factory with the Preset Mode Timing shown on page 24.
The OSD (On-Screen Display) Menu allows the user to adjust
various settings and options by following the steps below.
1
Press the MENU button to display the OSD. The OSD main
menu provides an overview of the selection of controls
available.
picture
advanced
audio
options
utilities
source
reset
exit
2
Press the ▲ or ▼ button to highlight the desired icon. Then,
press the MENU button to activate the highlighted icon.
3
Press the ▲ or ▼ button to select the desired adjustment
icon. Then, press the MENU button.
4
Press the ▲ or ▼ button to change the value of the selected
item.
5
Select the exit icon to exit the OSD.
6
Repeat steps 1 through 4 to make further adjustments. All
changes are stored immediately.
On-Screen Display (OSD) Menu
auto adjust
brightness
contrast
h position
v position
phase
clock
exit
<up>to select
17