Jakka CONTROL KIT 5 User Manual page 8

J.) SELECTING TEMPERATURE CONTROL POINT
There are 4 options that unit can check the temperature;
-Room thermostate
-Return Air
-Supply Air
-Outside Air
To select one of these;
•
Press UP and
•
Enter service menu password by using
•
Note: Service menu password is
Then go to Parameter ''118'' by using
•
•
Change the parameter by using
Parameter 118 could be one of below numbers
0-Room thermostate
1-Return Air
2-Supply Air
3-Outside Air
•
Get out of menu by pressing
Note: Selected sensor should be connected to the card . If not, there will be "- -" symbol on the screen.
DOWN buttons simultaneously
"58"
UP and
ON/OFF
UP and DOWN and press Mode/OK.
UP and DOWN buttons then press
DOWN buttons then press
button
Mode/OK button
Mode/OK button.
TR