Download Print this page

Jakka CONTROL KIT 5 User Manual page 24

Hide thumbs Also See for CONTROL KIT 5:

Advertisement

1. Standard Heat Recovery
Scenario
In this scenario, unit supplies fresh air to environment and exhaust stall air. This scnario has only manual mode. Supply
and exhaust fans can be set seperately in 6 different speeds via room thermostate . Room thermsotate shows
temperature of inner space where it is already located.
Note;
The electrical board comes with Scenario Number 4 as default.
To change the scenario please follow the steps defined in ''Changing the Scenario''
When Scenario 1 is selected , unit is ready to work as standard heat recovery.
2.
Heat Recovery with 3 Steps Electrical Heater (With Fresh Air Damper)
Scenario
In this mode; exhaust and supply fans and after heater can be controlled.
Temperature is measured by room thermostate
If room temperature is measured below set value, temperature will be increased by using after heater
If room temperature is measured above set value,, temperature will be dccreased by shutting down the steps
of after heater till room thermostate readsroom temperature equal to set value
Note;
The electrical board comes with Scenario Number 4 as default.
To change the scenario please follow the steps defined in ''Changing the Scenario''
When Scenario 2 is selected , unit is ready to work as Heat Recovery with 3 Steps Electrical Heater (With Fresh Air Damper)
3.
Heat Recovery with 3 Steps Electrical Heater (With By-Pass Damper)
Scenario
In this mode; exhaust and supply fans and after heater can be controlled.
Temperature is measured by room thermostate
If room temperature is measured below set value, temperature will be increased by using after heater
If room temperature is measured above set value,, temperature will be dccreased by shutting down the steps
of after heater till room thermostate readsroom temperature equal to set value
Note;
The electrical board comes with Scenario Number 4 as default.
To change the scenario please follow the steps defined in ''Changing the Scenario''
When Scenario 3 is selected , unit is ready to work as Heat Recovery with 3 Steps Electrical Heater (With By-Pass Damper)
TR

Advertisement

loading

Related Products for Jakka CONTROL KIT 5