SOLIS GRIND & INFUSE PERFETTA User Manual page 37

Problem Possible cause
The appliance The steaming function button
does not dispense blinks or continuously lights up
hot water. white. The steaming function is
activated.
The cup extraction buttons
blink. The hot water function is
not ready yet.
The water level in the water
tank is too low.
The steaming wand nozzle is
clogged.
The appliance is damaged
The water filter cartridge is
clogged.
The steaming The used milk jug is too big or
wand fails to has an unsuitable shape.
steam the milk.
The milk used has less than
3.3% milk protein.
Solution
Press one of the cup extraction
buttons.
Wait until the cup extraction
buttons constantly light up
white.
Refill the water tank to the MAX
indicator.
Install the water tank correctly.
Clean the steaming wand
nozzle (section Monthly
maintenance).
Contact Solis or a Solis
authorized service center.
Replace the water filter
cartridge (see section Replacing
the water filter cartridge).
Use another milk jug.
Use milk with more than 3.3%
milk protein.
37