Using The Hot Water Function - SOLIS GRIND & INFUSE PERFETTA User Manual

If the steaming wand is used for dispensing hot water, the steaming wand
4
dispenses water residue before the steaming function activates. For good steamed
milk, first dispense the residue before putting the steaming wand into the milk.
3. Check if the steaming function button
Lower the nozzle of the steaming wand
4.
Rotate the steaming knob
5.
6. Wait until the milk is steamed as desired.
When you cannot touch the side of the milk jug for longer than 3 seconds, the
4
temperature is optimal (approximately 149 °F.
Rotate the steaming knob
7.
When not switched off, the steaming function automatically switches off after 2
4
minutes.
Clean the nozzle of the steaming wand
8.
Rotate the steaming knob
9.
10. Press one of the cup extraction buttons
The cup extraction buttons
constantly light up white, the system is ready for making coffee.
k
11. Pour the frothed milk directly into an espresso.
12. Clean the milk jug
U S I N G T H E H OT WAT E R F U N C T I O N
V
Risk of burn injury. Parts of the appliance become hot during
use.
•
During or directly after the steaming process, only touch the
steam and hot water wand by using the thermo-insulated
loop. The steaming wand gets hot.
•
Do not point the tip of the steaming wand directly at the
bottom of the cup.
•
Never point the steam and hot water wand towards people,
animals, or moisture sensitive items.
l
5
counterclockwise to switch on the steaming wand 5.
z
clockwise to switch off the steaming wand 5.
z
5
to remove all milk from the steaming wand 5.
z
j k
start flashing. When the cup extraction buttons
j k
with water or in a dishwasher after use.
r
constantly lights up white.
a few millimeters into the milk.
with a damp cloth.
to cool down the steaming function.
j
21