SOLIS GRIND & INFUSE PERFETTA User Manual page 27

11. Open the hopper gate at the back of the bean container 1.
12. Place a container under the portafilter holder 3.
13. Switch on the appliance.
14. Press and hold the grind time knob
15. When all GRINDZ
TM
to switch off the grinder.
16. Close the hopper gate.
17. Switch off the appliance and remove the bean container
18. Empty the bean container 1.
19. Rinse the bean container
20. Rinse the bean container
21. Dry the bean container
22. Reassemble the grinder and the bean container 1. Make sure all parts lock in
place.
23. Fill the bean container
24. Open the hopper gate at the back of the bean container 1.
25. Switch on the appliance.
26. Press and hold the grind time knob
27. After 20 seconds, release the grind time knob
28. Set the grind size selector
29. Switch off and unplug the appliance.
Make sure the portafilter is not hot when removing the spout.
4
30. Unscrew the spout of the portafilter s.
31. Soak the following parts in warm water and a mild detergent:
• Portafilter (only the metal parts)´
s
• Cup filters
p a
• Spout
32. Unscrew the steaming nozzle from the steaming wand 5.
If the nozzle opening is blocked, you can use the pin on the cleaning tablet holder
4
to remove the blockage. If you cannot unblock the nozzle with the pin, rinse the
nozzle with warm water and try again.
33. Rinse the nozzle in warm water.
34. Gently screw the nozzle back onto the steaming wand 5.
35. Clean the appliance and the water tank
36. Dry the appliance and the water tank 8.
37. Plug in and switch on the appliance.
to switch on the grinder.
c
has run through the appliance, release the grind time knob
with warm water and a mild detergent.
1
with clean water.
1
thoroughly.
1
with coffee beans.
1
to switch on the grinder.
c
back to the desired position.
g
8
(see image E).
1
to switch off the grinder.
c
with a soft and damp cloth.
c
27