Pitney Bowes AddressRight DA70S Operator's Manual page 58

Throughput
Throughput specifications for the printer have the following
parameters in common: 18 average Characters per line; 12 point
character size; roman font; 6 lines per inch; each line terminated with
CR LF; each address terminated with FF (all speeds rated in pieces/
hour).
Minimum throughputs for Destination address (3 lines):
• 600 x 200 dpi - 14000 letters per hour (lph)
• 600 x 300 dpi - increase the per piece time by the larger of
12.5% of the time per piece at 200 dpi or 50 msec/piece
• 600 x 600 dpi - increase the per piece time by the larger of
28.5% of the time per piece at 200 dpi or 115 msec/piece
Minimum throughputs for Destination address (3 lines) with an
additional 1" (25mm) tall IBIP variable graphic:
• 600 x 200 dpi - 3300 letters per hour (lph)
• 600 x 300 dpi - increase the per piece time by the larger of 150%
of the time per piece at 200 dpi or 800 msec/piece
• 600 x 600 dpi - increase the per piece time by the larger of 300%
of the time per piece at 200 dpi or 800 msec/piece
NOTE: Graphics affect throughput speed.
Stacker Capacity
• Input Stacker: 600 #10 or DL Envelopes with Bin extension, or
250 without extension installed.
• Output Stacker: 150 #10 or DL Envelopes
SV61665 Rev. C
Specifications • Appendix A
A-5