Print Modes (Print Resolution)
The printer has three print resolutions. These resolutions are
Executive (600), Letter (300), and Draft (200), which represent the
horizontal density. Additionally, there are two Light Mode settings (ON
and OFF), which represent the vertical density. When Light Mode
is "ON", the vertical density setting is 300 DPI; when Light Mode is
"OFF" the vertical density setting is 600 DPI. Refer to the table below
for the print mode options.
Print Quality:
Executive
Letter
Draft
Fonts
Resdent Fonts
Arial, Comic Sans MS, Courier New, Georgia, Impact, Kino, MSLogo,
Symbol, Tahoma, Times New Roman, Trebuchet MS, Verdana,
Webdings, Wingding, an OCR-A font and a Code 39 font. All fonts
are scalable from 4 to 144 point size.
Resdent Font Enhancements
Bold, Italic
Downloadable Fonts
Supports bitmapped, downloadable fonts.
Cartrdge Fonts
Not Required. Fonts are downloaded with addresses.
User-Defnable Parameters
•
Font Characteristics
•
Address Placement
•
Barcode Characteristics
•
Print Quality
SV61665 Rev. C
Specifications • Appendix A
With Light Mode
set to "ON":
600 x 300 DPI
300 x 300 DPI
200 x 300 DPI
With Light Mode
set to "OFF":
600 x 600 DPI
300 x 600 DPI
200 x 600 DPI
A-3