Riding Mode Selection; Rain Mode; Road Mode - Triumph Street Triple S 2022 Owner's Handbook Manual

Lap Timer Reset
To reset the lap timer and exit the lap
timer:
▼ Press button B for two seconds.
▼ After two seconds, the lap timer will
reset and Lap will be shown in the
display screen. This will delete the
stored data for all stored laps.
To exit the data retrieval mode without
resetting the lap timer:
▼ Press button A for two seconds. Lap
will be shown in the display screen.
▼ Press and release button A to select
the required display.
GENERAL INFORMATION

Riding Mode Selection

Warning
After selecting a riding mode, operate
the motorcycle in an area free from
traffic to gain familiarity with the new
settings.
Do not loan your motorcycle to
anyone as they may change the riding
mode settings from the one you are
familiar with,
motorcycle control and an accident.
Riding modes may be selected when the
motorcycle is stationary or moving.
When the MODE button is pressed, the
riding modes are displayed in the
following sequence:

▼ RAIN Mode

▼ ROAD Mode

▼ SPORT Mode
▼ RIDER Mode.
There is a one second delay after
pressing the MODE button between
each of the modes to allow for further
scrolling to take place.
The selected mode is automatically
activated once the one second delay
has elapsed, and the conditions for
switching modes have been met.
The last selected riding mode will be
remembered and activated when the
ignition is switched ON.
causing loss of
93