Triumph Street Triple S 2022 Owner's Handbook Manual page 58

GENERAL INFORMATION
58
Trip Set Up - Automatic Reset
To set the
automatically reset:
▼ From the TRIP SETUP menu, push
the joystick down/up and then press
the joystick center to select TRIP 1
RESET or TRIP 2 RESET.
▼ Push the joystick down/up to select
AUTOMATIC and then press the
joystick center to confirm.
▼ Using the joystick down/up, choose
the timer setting and press the
joystick
required time limit.
▼ The required time limit is then stored
in the trip memory. A tick is shown to
indicate the selected option.
▼ When the ignition is turned off, the
trip meter is set to zero when the
time period has elapsed.
The following table shows two examples
of the automatic trip reset functionality.
Ignition
Turned Off
10:30 hrs
18:00 hrs
trip computer
center to confirm
AUTOMATIC
1 HR
2 HRS
4 HRS
8 HRS
12 HRS
16 HRS
BACK EXIT SELECT
Trip Meter
Selected
Resets to
Time Delay
Zero
4 HRS 14:30 hrs
10:00 hrs
16 HRS
(next day)
Trip 2 Enable/Disable
to Trip 2 meter can be enabled or disabled.
If trip 2 meter is disabled, it will no
longer be shown in the information tray.
the
To enable or disable the Trip 2 meter:
▼ From the TRIP SET UP menu, push
the joystick down/up to scroll to the
TRIP 2 DISPLAY. Press the joystick
center to confirm.
▼ Push the joystick down/up to scroll
between ENABLED and DISABLED.
Press the joystick center to confirm.
A tick is shown to indicate the
selected option.
TRIP 2 DISPLAY
ENABLED
DISABLED
BACK EXIT SELECT