Avaya 3641 Administration Manual page 74

Softkey Name
Logs Call Logs
Hold Hold
Msg Message
Mute Toggle muting
OK OK
Redl Redial
Rej Reject
Resm Resume
Save Save
Symb Symbols
4
Appears only if MSGNUM is configured. A message center contact address must be defined for the proxy used by
the selected line.
74 Avaya 3641/3645/6120/6140 IP Wireless Handset SIP Administration Guide
Displayed during...
Standby mode
In an active call.
Initial dial screen when new
line is selected and a dial
tone is active prior to
entering first character of the
4
number to be dialed .
In an active call.
Power up registration if
username is not configured
in menu.
Admin
Prior to entering the first
character of a dial number.
Incoming call on the selected
line.
In an active call and you
have placed the call on hold
or in standby mode if any call
is on hold.
Entering a dial number as a
forward destination.
Entering a username or
password.
Entering the digits of a
number.
Press to...
Open the Call Log menu.
Place the call on hold. The line status
shows when the call is on hold or
when audio is flowing.
Initiate a call to the specified
message center contact address for
retrieval or administration of
voicemail.
Toggle audio transmission to the far
end. The line status shows
not muted or when muted.
Send the username and password to
the SIP server for authorization to
register the handset.
Redial the last number that was
dialed.
Reject the incoming call. The SIP
server will then redirect the call
elsewhere.
Resume a call that was previously
placed on hold or that went on hold
when another line was activated.
Save the dial number as the
forwarding destination for the
selected line.
Select the set of symbols available
on the keypad while entering data.
when
June 2012