Avaya 3641 Administration Manual page 106

Message Description
Prom Bad Length The handset software downloaded files
that are incorrect or corrupted.
Registering The handset has completed
initialization of the SIP application and
is attempting to register lines to the
SIP proxy servers.
RTP Open Failed The handset attempted to open an
RTP port for audio but was
unsuccessful.
Select License The correct protocol has not been
selected from the license set.
Handset is attempting to download
Server Busy
from a HTTP/TFTP server that is busy
downloading to other devices and
refusing additional downloads.
SIP Login Prompt for login information –
username and password.
Socket open fail. Occurs when the
Skt Open Fail
handset attempts to open a connection
to the proxy server but fails.
Service Rej. The Avaya SVP Server has rejected a
request from the handset.
Storing Config Handset is storing changes to handset
configuration.
SVP Service Rej. The Avaya SVP Server has rejected a
request from the handset.
System Busy y...y = SVP Server IP Address.
yyy.yyy.yyy.yyy SVP Server has reached call capacity.
System Locked
Avaya SVP Server is locked.
(with Busy Tone)
106 Avaya 3641/3645/6120/6140 IP Wireless Handset SIP Administration Guide
Action
Download new software from the Avaya
website per
Software Maintenance
If registrations are failing, the phone can
stay in this state for a considerable
length of time. After the phone leaves
this state, press the
LINE
what lines have failed to register.
Ensure usernames and passwords
have been entered in administrative
menus for registrations that have failed
and that proxy information is correct in
the SIP configuration files.
Verify that Avaya SVP Server capacity
has not been exceeded.
Using the menu, select one
Admin
license from the set to allow the phone
to download the appropriate software.
None, the handset will automatically
retry the download every few seconds.
At power-on initialization, no username
was detected in the
Admin
for SIP registrations. Enter a valid
username and password for an existing
SIP configuration file.
Verify that Avaya SVP Server capacity
has not been exceeded.
The handset will restart and attempt to
re-register with the Avaya SVP Server,
which should fix the problem. Report to
your administrator if it keeps happening.
None. Informational only. The handset
may display this briefly following a
configuration change or software
download.
The handset will restart and attempt to
re-register with the SVP Server, which
should fix the problem. Report to your
administrator if it keeps happening.
All call paths are in use, try the call
again in a few minutes.
Try call again later, system has been
locked for maintenance.
.
key to view
menu items
June 2012