Advertisement
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
A.
Base
1 pc.
B.
Foot
4 pcs.
home
200 -10-FB
1
Chair
styles Customer Service: www.homestylesfurniture.com,
servicedesk@homestylesfurniture.com,
80
888-680-7460
C.
Back Cushion
1 pc.
Advertisement
Table of Contents
Related Manuals for Homestyles 200 -10-FB 1 80
Summary of Contents for Homestyles 200 -10-FB 1 80
- Page 1 200 -10-FB Chair IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble.
- Page 2 Assembly Instructions 2/3 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. STEP 1 Zipper Open zipper at bottom of Base (A), remove Feet (B), then close zipper. (See Figure 1) Figure 1 STEP 2 Attach Feet (B) to Base (A), then tighten.
- Page 3 Assembly Instructions / 3 3 Back Cover Back Figure 2 STEP 3 Latch Turn unit to its upright position. Rotate back into position. Lock back in position with latches. (See Figure 2) Attach back cover to back of unit. (See Figure 3) Figure 3 STEP 4 Place Back Cushion (C) into position.
- Page 4 200 -08-FB Ottoman IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble.
- Page 5 Assembly Instructions 2/3 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. STEP 1 Zipper Open zipper at bottom of Base (A), remove Feet (B), then close zipper. (See Figure 1) Figure 1 STEP 2 Attach Feet (B) to Base (A), then tighten.
- Page 6 Assembly Instructions / 3 3 STEP 3 Turn unit over to its upright position.
- Page 7 CARE INSTRUCTIONS NEVER NEVER use glass cleaners on allow liquids to remain on furniture. finished furniture. Ammonia Absorption causes parts to warp chemically attacks the finish. and split and finishes to delaminate. Do not use power tools Do not place Do not write above 8 volts to assemble.
Need help?
Do you have a question about the 200 -10-FB 1 80 and is the answer not in the manual?
Questions and answers