Error Messages - Pioneer S-DV535 Operating Instructions Manual

Additional information
Problem
Audio is interrupted.
Audio is suddenly
interrupted.
Audio cannot be
received.
Horizontal stripe noise
interference on a TV
near the transmitter.

Error Messages

Message
Key Lock
RMode On
PhonesIn
96k
Muting
Exit
W.Stereo
Noisy!
Err MIC!
Err SP!
Remedy
• This system uses high frequency radio waves that have properties similar to
light, such as linearity, reflection, refraction, diffraction, and interference.
Therefore, placement of the system can result in weak radio waves and/or
interruption.
• The distance between the transmitter and wireless speaker may be too
large. Use the wireless speaker within the reach of radio wave from the
transmitter.
• The system may be close to a location generating electrical noise. If this is
the case, find a location that does not affect the sound adversely.
• There may be radio communication equipment using the same frequency
band (2.4 GHz) as this system, such as a Bluetooth device, radio LAN device,
cordless phone or microwave oven, operating nearby.
• The radio wave reception is variable depending on locations due to the
effects of obstacles and reflecting objects. Try changing the location of the
wireless speaker a little.
• The transmitter and wireless speaker are designed and sold as a pair, and
they identify each other in communication. This means that communication
is not available between separately purchased transmitter and wireless
speaker.
• If there a piece of A/V equipment with an antenna near the transmitter,
move the transmitter away from the antenna input terminal of the AV
equipment.
Description
• The child lock feature is active. See Key lock setting on page 39.
• An operation is prohibited because the Recording Mode is on (see
Recording mode on page 30).
• An operation is prohibited because headphones are connected.
• An operation is prohibited because the source is digital 88.2 or 96kHz PCM.
• An operation is prohibited because the sound is muted (press MUTE).
• Appears when a menu is automatically exited after a set period of inactivity.
• An operation is prohibited because the wireless Stereo mode is selected.
• Appears when the ambient noise level is too high during MCACC setup.
• There is a problem with your mic connection
• There is a problem with one of the speaker connections during MCACC
setup.
during MCACC setup.
10
51
En