Dvd/Cd/Video Cd Player - Pioneer S-DV535 Operating Instructions Manual

Additional information
Problem
Snd Demo shows in
the display and the unit
can't be controlled.

DVD/CD/Video CD player

Problem
The disc is ejected
automatically after
loading.
Playback is not
possible.
Picture playback stops
and buttons cannot be
used.
Settings are canceled. • When the power is cut, settings will be canceled.
No picture/No color.
Screen is stretched or
aspect doesn't change.
When recorded on a
VCR or passed through
an AV selector, there is
disturbance in the
playback picture.
Picture disturbance
during playback or
dark.
Noticeable difference
in DVD and CD
volume.
Remedy
• Press and hold (stop) on the front panel for about five seconds. The disc
tray ejects automatically to indicate the Sound Demo mode is disabled.
Remedy
• Clean the disc and align the disc properly in the disc guide.
• If the region number on a DVD-video disc does not match the number on
the player, the disc cannot be used (see DVD Video regions on page 40).
• Allow time for any condensation inside the player to evaporate. Avoid using
the player near an air-conditioning unit.
• If the disc is loaded upside down, reload the disc with the label side face
up.
• Press (stop), then
• Switch the power off once, then on again using the front panel
STANDBY/ON button.
• Check that connections are correct and that plugs are inserted fully.
• Check the manual of the TV/monitor to make sure the settings are correct.
• The TV Screen setting is incorrect. Set the TV Screen option to match the
TV/monitor you're using (see Video Output settings on page 26).
• This system uses copy-protection technology which may prevent recording
or cause picture problems when connected through a VCR or AV selector.
This is not a malfunction.
• This player is compatible with Macro-Vision System copy guard. Some
discs include a copy prevention signal, and when this type of disc is played
back, stripes etc., may appear on some sections of the picture depending on
the TV. This is not a malfunction.
• Discs respond differently to particular player functions. This may result in
the screen becoming black for a brief instant or shaking slightly when the
function is executed. These problems are largely due to differences between
discs and disc content and are not malfunctions of this player.
• DVDs and CDs use different recording methods. This is not a malfunction.
(play) to start playback again.
10
49
En