Advertisement
www.raider.bg
12
2. Charging a lithium-ion rechargeable battery with the charger.
Remove the rechargeable battery from the machine by pressing the button. Pay attention to mains voltage when
charging the battery! The mains voltage must match the data on the charger label. Appliances marked with 230 V can also
be powered with a voltage of 220 V.
Plug the plug into the socket. The green LED will light up. Put the depleted rechargeable battery into the charger. the red
LED will illuminate. Once the battery is charged, the red LED will go off and will turn green.
See explanation table:
Red LED
Off
On
Off
3. Charge the charger. Terms of use.
Store the charger only in a dry place and at an ambient temperature of 10-30 ° C. Protect them from moisture and direct
sunlight. In use, use the charger only in a dry place and at an ambient temperature of 0-45 С ֯ .
Disposal and recycling
In order to protect the environment, the power tool and the packaging must be subject to appropriate processing for the
re-use of those contained therein raw materials. Do not dispose of power tools in household waste! Under the Directive of
the European Union 2012/19 / EC on end-of-life electrical and electronic equipment devices and the endorsement and as
a national law the power tools they can not to be used more, must be collected separately and subjected to the appropriate
processing for recovery of the raw materials contained therein.
Green LED
On
ready for use; there is no
Off
On
Disconnect the charger from
Explanations and actions
Ready for use
The charger is connected to the mains and is
battery pack in the charger
Charging
The charger is charging the battery pack
The battery is charged and ready for use.
Action:
Take the battery pack out of the charger.
the mains supply.
Advertisement
