Download Print this page

Raider Peo 039707 User Manual page 11

Dual charger

Advertisement

capacities or those with no experience and knowledge if they are supervised or have received instruction in how to use the equipment
safely and understand the dangers which result from such use.
Children are not allowed to play with the equipment. Unless supervised, children are not allowed
to clean the equipment and carry out user-level maintenance work.
Replacing the power cable
If the power cable for this equipment is damaged, it must be replaced by the manufacturer or or to prevent hazards.
The charging unit is not allowed to be used for non-rechargeable, normal batteries.
Sufficient ventilation is required.
The current and voltage information on the battery pack must be the same as that on the
charging unit.
Do not expose the charging unit to splashwater or rain.
The charging unit must be disconnected from the socket outlet before the rechargeable
battery is inserted into or removed from the charging station.
Do not throw old or damaged batteries into water or fi re. Follow the environmental protection
directives.
A defective or no longer chargeable battery must be treated as special waste. Dispose of it at a special collection point.
Do not dispose of it with your normal household waste or throw it into water or fi re.
Place the charging unit away from all sources of heat.
To reduce the risk of electric shock, pull the power plug out of the socket outlet by the plug itself and not by the cable
when you want to disconnect the charging unit from the power supply.
Do not take the charging unit apart. Take it to an authorized repair center if servicing or repairs are needed. Incorrect
assembly can result in an electric shock and even death or fire.
Children must always be supervised in order to ensure that they do not play with the equipment.
Operation
The battery charger can be used to charge either 1 or 2 rechargeable batteries. By charging independently you can also charge
different batteries (e.g.: 2.0 Ah and 4.0 Ah) simultaneously for the charging times stated on the charger.
1. Pull the battery pack (a) out of the equipment, pressing the pushlock button (b) to do so.
2. Check that your mains voltage is the same as that marked on the rating plate of the battery charger. Insert the power plug of
the charger into the socket outlet. The green LEDs will then begin to flash.
3. Insert the battery pack or packs (a) into the battery charger.
4. See the table below with an explanation of the LED indicator on the charger.
If the battery fails to charge, please check
• whether there is voltage at the socket outlet
• whether there is good contact at the charging contacts of the charging unit
If the battery still fails to charge, send the charging unit and the rechargeable battery to our customer service center.
Timely recharging of the battery will help it serve you well for a long time. You must recharge the battery when you notice that
the power of the cordless device drops.
Cleaning and maintenance
Always pull out the power plug before starting any cleaning work. The equipment is not allowed to be stored in a damp location
or where there are caustic gases. Keep it in a dry place out of the reach of children.
Cleaning
Keep the surface of the equipment clean and wipe it only with a dry cloth.
Maintenance
There are no other parts inside the equipment which require maintenance. The equipment is not allowed to be taken apart. If the
equipment is damaged, contact your supplier or the manufacturer.
Charging a lithium-ion battery with the charger
Table for indicator status
11

Advertisement

loading