Seed Cup Shutoff - Tar River SAYA-505 Operator's Manual

No Till Drill SAYA-505, 507

Seed cup shutoff:

Depending on the crop being planted, it may be necessary to not disburse from all of the seed cups. This is eas-
ily done by simply sliding the "Seed shut off flap" in and out.
Closed Closed
Seed depth - Rear Roller
The depth in which the application is done is controlled by adjust-
ing the basket located near of the machine. Adjusting the "Sowing
depth control device " as follows:
Turning knob clockwise will make the basket drop which in turn
will raise the disc openers and lessen the depth of the application.
Turning the knob counterclockwise would raise the basket which
would lower the disc openers and make the application deeper.
Seed depth - Torsion Bar
Turning the Torsion Bar wheel will increase spring tension on the
individual discs to apply additional pressure.
Operating Instructions
Open Open
17
Closed Open