Seedcup Shutoff; Seed Depth Control - Tar River SAYA-507 Operator's Manual

SEED CUP SHUTOFF
Depending on the crop being planted, it may be necessary to not disburse from all of the
seed cups. This is easily done by simply sliding the SEED SHUT OFF FLAP in and out.
CLOSED
SEED DEPTH - REAR ROLLER
The depth in which the application is done is controlled by
adjusting the basket located near the rear of the machine.
Adjusting the Sowing Depth Control Device as follows:
Turning knob clockwise will make the basket drop which in
turn will raise the disc openers and lessen the depth of the
application. Turning knob counterclockwise would raise the
basket which would lower the disc openers and make the
application deeper.
SEED DEPTH - TORSION BAR
Turning the Torsion Bar wheel will increase spring tension
on the individual discs to apply additional pressure.
OPEN
SEED DEPTH - DISC SUPPORT BAR
Additional pressure can be added by moving the curved clip
into another hole on the Disc support Bar.
CLOSED OPEN
13