No Till Drill SAYA-505, 507
Step 1:
Carefully uncrate and remove all parts. Ensure the
double disc openers and coulters are inline and set at
their proper 7 1/2" spacing.
Step 2:
Mount hopper box with the lid opening facing the
front of the implement. DO NOT TIGHTEN THE
BOLTS AT THIS TIME!
Step 3:
Install the short sprocket shaft, sprocket and chain. The
11 tooth sprocket goes on the left and 12 tooth sprock-
et on the right.
Step 4:
Lightly push the seed box forward to tighten the chain.
Use an allen wrench to tighten the drive sprocket after
ensuring the chain is straight. Tighten bolts left loose
in Step 2. Install chain shields.
Assembly
12