Tar River SAYA-505 Operator's Manual page 35

No Till Drill SAYA-505, 507
Item
Part #
76A SA7001
77 LW18
78 FW18
79 SA4023
80 SA4024
81 SA4025
82 SA4026
83 CP2.5x20
84 SA6010
85 SA4027
SA4028
86 FW16
87 BM061025
88 NM0610
89 NM1620L
NM1620
90 BM061012
91 OS203207
92 SRI-45
93 SA6003
94 LW12
95 FW12
96 NM12175
97 SA8006
98 DNM2025
99 SA8002
100 SA4036
101 CP2.5x20
102 NM1420
Note: Warning! When removing/replacing Disc Assembly Studs note that the LH & RH studs have different thread pat-
terns! Using the wrong stud will cause damage to the stud and or the seed drill casting!
SA4027 Stud, disc assembly LH has LH threads on both ends of the stud. SA4028 Stud, disc assembly RH has RH threads on
both ends of the stud. These parts are not interchangeable! The LH stud must be used on the LH side of the Seed drill casting.
The RH stud must be used on the RH side of the Seed drill casting.
Removing Disc Assembly studs:
LH - Facing the LH side of the Disc Assembly, turn the nut on the stud in a clockwise rotation.
RH - Facing the RH side of the Disc Assembly, turn the nut on the stud in a counter-clockwise rotation.
Re-attaching Disc Assembly studs:
LH - Facing the LH side of the Disc Assembly, turn the nut on the stud in a counter-clockwise rotation.
RH - Facing the RH side of the Disc Assembly, turn the nut on the stud in a clockwise rotation.
Frame Assembly
Description
Coulter disc complete
Washer lock M18
Washer flat M18
Damper rod
Damper guide
Star washer
Retainer clip
Cotter pin M2.5x20
Pin, clevis M6x40
Stud, disc assembly *Warning! See note 2 below.
Stud, disc assembly *Warning! See note 2 below.
Washer flat M16
Bolt M6-1.0x25
Nut M6-1.0
Nut M16-2.0 LH threads (for SA4027 LH stud only)
Nut M16-2.0 (for SA4028 RH stud only)
Bolt M6-1.0x12
Oil seal - M20x32x7
Snap ring - internal - M45
Disc support
Lock washer M12
Flat washer M12
Nut M12-1.75
U-bolt
Dome (Cap) Nut - M20 x 2.5 GALV
Coulter disc
Adjustment shaft
Cotter pin
Nut M14-2.0
35
Qty.
-
4
4
-
-
-
-
-
-
20
20
40
240
240
20
20
120
40
40
-
-
-
-
-
2
-
2
2
2