Leica M844 User Manual page 45

Setting the light start values
You can set the start values for the main lamps, the OttoFlex
lamp and the magnification on this screen.
➩Clicking the "+" or "-" key changes the values in increments of
one.
➩Holding down the key with your finger changes the value in
increments of five.
You can also set the desired value by directly clicking
the bars.
Setting the drive start values
You can set the start values for the zoom, focus, XY and tilt
drives on this screen.
➩Clicking the "+" or "-" key changes the values in increments of
one.
➩Holding down the key with your finger changes the value in
increments of five.
You can also set the desired value by directly clicking
the bars.
TM II
Leica M844 – Leica M820 / Ref. 10 713 294 / Version I
Footswitch/handswitch assignment
Here, you can configure individual settings for each user for
your footswitch/handswitch.
➩In the right selection field, select the footswitch/
handswitch you are using.
➩You can scroll forwards or backwards in the list by clicking
the arrowheads.
➩If you click the "Cataract" or "Retina" button, the selected
footswitch/handswitch is assigned the default settings.
➩You can then modify these settings as you like.
➩Clicking the "Clear All" button clears the assignments for all
keys.
If you are creating only one footswitch/handswitch
configuration for one user, we recommend duplicating
it to the second footswitch/handswitch input by press-
ing the "Duplicate" button. This ensures that your
footswitch/handswitch functions the way you want it
to, regardless of which input it is plugged into.
Configuring individual keys
➩In the right selection field, select the footswitches/
handswitches you are using.
➩You can scroll forwards or backwards in the list by clicking
the arrowheads.
➩In the left selection field, select the function group that
contains the desired function.
➩You can scroll forwards or backwards in the list by clicking
the arrowheads.
➩Select the desired function.
➩Click the caption of the desired key to assign the selected
function to it. Or, press the corresponding key on the
connected footswitch.
Use
43