Panasonic CF-30FTSAZAM Service Manual page 48

Figure seen from direction of arrow of A
Valley Fold (Dotted Line)
7.2.13. Setting the USB PCB and Antenna PCB
1. Open the Connector Cover.
2. Fix the Antenna PCB using the 2 Screws. <N3>
3. Connect the 2 white Cables.
4. Fix the USB PCB using the Screws. <N6>
5. Connect the Cable to the Connector. (CN100)
6. Attach the Tape.
Screws <N3>: DRQT2+G6FKL
Screws <N6>: DRQT26+E4FKL
The terminal of the antenna
cable must not come in
contact with this terminal.
(Put it on the metal fittings
side. )
Insert FPC into Relay Circuit Board Ass'ys socket
Mountain Fold (Straight Line)
FPC
Insert the Plug
into the Socket
A
Cable
Lock after FPC insertion
FPC
FIG
FPC
OK
The attention of folding : Breakage countermeasure.
1,The bending inside is R0.5 1
(R0.5 1)
2,Don't mistake a bending direction.
Don't use a mistaken thing.
NG
Connector
(CN100)
USB PCB
Antenna PCB
Antenna Cable
(White)
Antenna Cable
(White)
7-27
Relay Circuit Board Ass'y
Tape
<N6>
Connector Cover
<N3>
<N3>