7.1.9.
Removing the FPC HDD BAT
FPC HDD BAT
<N29>
<N29>
<N29>
<N29>
HDD Cable Cover
Pad Protect
Sheet
Connector
(CN8)
Connector
(CN7)
Pad PCB
1. Remove the 4 Screws. <N29>
2. Remove the HDD Cable Cover.
3. Remove the Antenna Cable Sheet.
4. Remove the 2 Tapes.
5. Disconnect the 2 Cables from the 2 Connectors.
(CN10,CN26)
6. Remove the Tape.
7. Disconnect the Cable from the Connector. (CN9)
8. Remove the Pad Protect Sheet.
9. Disconnect the Cable from the Connector. (CN800)
10. Disconnect the 2 Cables from the 2 Connectors. (CN7,CN8)
11. Remove the Screw. <N16>
12. Remove the FPC HDD BATT.
Screws <N16>: DRQT26+E5FKL
Screws <N29>: DRQT26+E3FNL
to Connector (CN8)
to Connector (CN7)
<N16>
to Connector (CN9)
to Connector (CN800)
Antenna Cable Sheet
to Connector (CN26)
Tape
Connector(CN10)
Connector(CN26)
Tape
Connector(CN9)
Connector (CN800)
7.1.10. Removing the PAD PCB
TP PCB Screw Sheet
Tape
Connector
(CN801)
Pad PCB
1. Remove the Tape and disconnect the Cable from the Con-
nector. (CN801)
2. Disconnect the Cable from the Connector. (CN802)
3. Remove the TP PCB Screw Sheet.
4. Remove the 2 Screws. <N29>
5. Remove the PAD PCB.
Screws <N29>: DRQT26+E3FNL
7.1.11. Removing the Main PCB
1. Remove the TOP Screw Sheet.
2. Remove the Screw. <N7>
3. Disconnect the 2 Cables from the 2 Connectors.
(CN17,CN27)
7-5
<N29>
<N29>
Connector
(CN802)
TOP Screw Sheet
<N7>
Connector
(CN17)
Connector
(CN27)